awb7222 1.805 - 1.880 ghz small-cell power amplifer module data sheet - rev 2.3 14 pin 7 mm x 7 mm x 1.3 mm surface mount module figure 1: block diagram product description the awb7222 is a fully matched, multi-chip-module (mcm) designed for picocell, femtocell, and customer premises equipment (cpe) applications. its high linearity and effciency meet the extremely demanding needs of small cell infrastructure architectures. designed for wcdma, hsdpa, and lte air interfaces operating in the 1.805 ghz to 1.880 ghz band, the awb7222 delivers up to +27 dbm of lte (e-tm1.1) power with an acpr better than -47 dbc. it operates features ? ingap hbt technology ? -47 dbc acpr @ 10 mhz, +27 dbm ? 32 db gain ? high effciency ? low transistor junction temperature ? matched for a 50 ? system ? low profle miniature surface mount package; rohs compliant ? multi-carrier capability applications ? wcdma, hsdpa and lte air interfaces ? picocell, femtocell, home nodes ? customer premises equipment (cpe) ? data cards and terminals from a convenient +4.5 v supply and provides 32 db of gain. the device is manufactured using an advanced ingap hbt mmic technology offering state-of-the- art reliability, temperature stability, and ruggedness. the self-contained 7 mm x 7 mm x 1.3 mm surface mount package incorporates rf matching networks optimized for output power, effciency, and linearity in a 50 system. r f in put vcc 1 rf out put v ref bi as net work ma tc hing net work ma tc hing net work bi as net work vcc 2 ma tc hing net work ma tc hing net work power detector v det 05/2015
2 figure 2: pinout (x-ray top view) table 1: pin description pin name description 1 v ref reference voltage 2 gnd ground 3 gnd ground 4 v cc1 supply voltage 5 rf in rf input 6 gnd ground 7 v det detector output 8 gnd ground 9 gnd ground 10 gnd ground 11 v cc2 supply voltage 12 rf out rf output 13 gnd ground 14 gnd ground gnd rf ou t rf in gnd 1 10 2 3 4 5 6 9 8 7 v cc1 gnd gnd gnd gnd gnd 14 13 12 11 v ref v det v cc2 gnd gnd data sheet - rev 2.3 05/2015 awb7222
3 electrical characteristics table 2: absolute minimum and maximum ratings table 3: operating ranges the device may be operated safely over these conditions; however, parametric performance is guaranteed only over the conditions defned in the electrical specifcations. pa ra me te r mi n ty p ma x unit co mme nt s op er at in g fr eque nc y (f ) 1805 -1 880 mh z su pply vo lt age (v cc )+ 3. 6+ 4. 5+ 4. 65 v re fe re nc e vo lt age (v ref ) +2 .7 5 0 +2 .8 5 - +2 .9 5 +0 .5 v pa "o n" pa "s hut dow n" rf ou tp ut po we r (p out ) (1) -+ 27 - db m ca se te mp er at ur e (t c ) (2) -4 0- +8 5 c functional operation is not implied under these conditions. exceeding any one or a combination of the absolute maximum rating conditions may cause permanent damage to the device. exposure to absolute ratings for extended periods of time may adversely affect reliability. parameter min max unit supply voltage (v cc ) 0 +5 v reference voltage (v ref ) 0 +3.5 v rf output power (p out ) - +30 dbm, modulated rf input power (p in ) - +10 dbm, cw esd rating human body model (1) charged device model (2) class 1c class iv - - msl rating (3) 4 - junction temperature (t j ) - +150 c storage temperature (t stg ) -40 +150 c notes: (1) jedec js-001-2010. (2) jedec jesd22-c101d. (3) 260 c peak refow. notes: (1) typ rf output power is used during production test. (2) case temperature references the board temperature at the ground paddle on the backside of the package. data sheet - rev 2.3 05/2015 awb7222
4 table 4: electrical specifcations (t c = +25 c, v cc = +4.5 v, v ref = +2.85 v, 50 ? system) notes: 3d(pdud0 (2) p out p ((00 o cc2 suudoodjpsudu parameter min typ max unit comments gain (2) 29 32 36 db 1805 - 1880 mhz acpr (1), (2), (3) @ 10 mhz @ 20 mhz - - -47 -57 -45 -55 dbc power-added effciency (1), (2), (3) 12 14 - % thermal resistance (r jc ) (4) - 13.5 - c/w junction to case supply current (1), (2), (3) - 796 928 ma total through v cc pins quiescent current (icq) - 250 320 ma reference current - 13 18 ma through v ref pin leakage current - 3 10 a v cc = +5 v, v ref = 0 v harmonics 2f o 3f o 4f o - - - -60 -55 -60 -55 -50 -55 dbc input return loss 15 20 - db output return loss 15 20 - db p1db - +35 - dbm cw tone spurious output level (all spurious outputs) - - -60 dbc p out +27 dbm in-band load vswr < 5:1 out-of-band load vswr < 10:1 applies over all voltage and temperature operating ranges load mismatch stress with no permanent degradation or failure 8:1 - - vswr v cc = +4.5 v, p out = +27 dbm applies over full operating temperature range data sheet - rev 2.3 05/2015 awb7222
5 application information to ensure proper performance, refer to all related application notes on the anadigics web site: http://www.anadigics.com shutdown mode the power amplifer may be placed in a shutdown mode by applying logic low levels (see operating ranges table) to the v ref voltage. figure 3: application circuit schematic 0.1u f 100u f gn d at slug rf input gn d v cc 2 v ref gn d gn d rf in v cc1 2 rf output 1000pf 4.7k rf out gn d v det 3 4 5 6 7 9 8 14 10 11 12 13 gn d gn d v cc2 10uf 0.1u f v ref v cc 1 10uf 1000pf 0.1uf 100uf det out 0.1u f 100k awb7222 1 tvs diod e tvs diod e notes: 1. 10uf and 100uf capacitors are optional . 2. applications that have large supply voltage transients may benefit from the use of tvs diodes. for such applications, recommended tvs diodes are sm05t1g or smj5.0a. gn d 1000pf gn d 100uf data sheet - rev 2.3 05/2015 awb7222
6 figure 4: pcb footprint data sheet - rev 2.3 05/2015 awb7222
7 package outline figure 5: package outline - 14 pin 7 mm x 7 mm x 1.3 mm surface mount module figure 6: branding specifcation data sheet - rev 2.3 05/2015 awb7222
8 component packaging figure 7: tape & reel packaging table 5: tape & reel dimensions pin 1 pa ckag e ty pe ta pe wi dt h po cke t pi tc h reel ca pa ci ty ma x reel di a 7 mm x 7 mm x 1. 3 mm 16 mm 12 mm 2500 13 " data sheet - rev 2.3 05/2015 awb7222
9 ordering information o rde r numb er te mp er at ure ra ng e pa ckag e descri pt ion co mp on ent pa ckagin g aw b 7222p 7- 40 o c to + 85 o c ro hs -c om pl ia nt 14 pi n 7 mm x 7 mm x 1. 3 mm su rf ace mo unt m odu le loose in ba g aw b 7222p 8- 40 o c to + 85 o c ro hs -c om pl ia nt 14 pi n 7 mm x 7 mm x 1. 3 mm su rf ace mo unt m odu le t ape an d re el , 2500 pi eces per r eel aw b 7222p 9- 40 o c to + 85 o c ro hs -c om pl ia nt 14 pi n 7 mm x 7 mm x 1. 3 mm su rf ace mo unt m odu le partial reel warning anadigics products are not intended for use in life support appliances, devices or systems. use of an anadigics product in any such application without written consent is prohibited. important notice anadigics, inc. 141 mount bethel road warren, new jersey 07059, u.s.a. tel: +1 (908) 668-5000 fax: +1 (908) 668-5132 url: http://www.anadigics.com anadigics, inc. reserves the right to make changes to its products or to discontinue any product at any time without notice. the product specifcations contained in advanced product information sheets and preliminary data sheets are subject to change prior to a products formal introduction. information in data sheets have been carefully checked and are assumed to be reliable; however, anadigics assumes no responsibilities for inaccuracies. anadigics strongly urges customers to verify that the information they are using is current before placing orders. data sheet - rev 2.3 05/2015 awb7222
|
